2020 Ford F-550 Regular Cab DRW 4WD

SaltDogg Dumper Dogg Stainless Steel Tailgate Spreader, electric drive. Fits all Dumper Dogg inserts.

Spread Material: bulk salt, salt & sand mix
Feed Mechanism: dual flight auger and breaker bar with mixing tines
Power Source: electric

• 304 stainless steel body

• Material spread up to 25'

• Two 12 VDC direct drive motors

• (3/4 HP for auger, 1/2 HP for spinner)

• Auger (5" O.D. x 2.4" I.D. x 20"L) with mixing tines

• Hinged 14" poly spinner

• The Galion 103U body is designed for superior service on 9900 - 19500 GVWR cab/chassis'. The 103U is constructed with 10 gauge stainless steel. Front corner posts, two intermediate side braces, full depth rear corner posts and boxed “material-shedding" top rails are also standard.

  • General Dimensions:
    Available in inside lengths from 8' through 11'-6", 84" inside width with 13" sides and 19" gate or 18" sides and 24" gate.

  • Sides:
    10 Gauge high tensile steel with material shedding boxed top rails, full depth 10" rear corner post, front side brace, two intermediate vertical side braces and 6" front and rear board extension pockets.

  • Floor:
    10 gauge high tensile steel, with 2" radius floor to side radius.

  • Front Bulkhead:
    10 gauge high tensile steel construction with two bend top flange.

  • Tailgate:
    10 gauge high tensile steel with full perimeter box bracing, two intermediate vertical box braces, double acting design with long chains and two sets of banjo eyes.

  • Tailgate Hardware:
    Heavy duty all stainless cast quick release top hardware and cast overshot lower hardware with manual release handle.

  • Lights:
    Meets all requirements of FMVSS108 with oval stop/tail/turn lights recessed in rear post. All lighting is recessed, shock mounted, complete with factory wiring harness.

  • Understructure:
    Stacked design utilizing 6" structural longitudinals gusseted to 3" structural channel crossmembers on 12" centers, lubricated front and rear cross shaft and full width rear bolster.

  • Safety Features:
    All Galion 103U bodies are shipped with a “body up" warning light and OSHA required back up alarm.

• This is the Desired 13 pin plow if you have a fleet of 13 pin plows once this is gone you will not be able to get them anymore. 

  Steel Boss HTX-V Plow.

  This plow is 90" wide in straight blade position, 74" in scoop position, and 81" in V position. It only comes in 14 gauge steel not poly or stainless steel.

  The HTX is designed for a half-ton or light-duty truck for home use or for a contractor. This has a full blade trip design to prevent damage when encountering obstacles. The hydraulics are all enclosed for safety from the elements and to prevent corrossion. This plow comes with the plow control and the LED Smart Light 3 plow lights. Attaches using the Smart Hitch 2.